Friday, March 7, 2014

Make Bow Targets From Inner Tubes

Used bicycle inner tubes can be recycled for target practice.


A round target made out of rubber inner tubes is ideal for archery practice because the soft impact surface of the rubber prevents the archer's target areas from breaking, which is a common problem when using solid boards as a target. A rubber inner tube target, when it is completed, will look a lot like a large hockey puck constructed out of coiled tubing.


Instructions


1. Cut the inner tubes at the point where the air inlet valve joins the tube, removing the valve with the blade attachment on the multi-tool. If the inner tubes are particularly difficult to cut, consider switching to the saw blade multi-tool attachment.


2. Roll the first inner tube into a spiral disk shaped so that it lays flat on the table. Stitch the inner tube into the disk configuration by stitching each layer to its neighboring layer within the spiral shape.


3. Stitch the end of the next inner tube to the preceding inner tube and wrap the inner tube around the spiral disk shape tightly, increasing its size. Stitch the newly wrapped inner tube into place using the same method as the central inner tube. Repeat this step until all of the inner tubes have been used or until the target reaches the desired size.


4. Brush the contact cement onto the backside of the inner tube target disk. Place the inner tube disk onto the back board side without the hanging bracket. Clamp the two pieces together with the c-clamp, with the wooden shim under the clamp's screw contact to distribute the force evenly. Allow the contact cement to dry, as per the instructions listed on the contact cement packaging.


5. Drive a nail into the desired target mounting location with the hammer, leaving only about half an inch of the nail head raised from the surface. Hang the target on the nail.









Related posts



    The price tag of hair accessories for girls tends to rise whenever color, beads or unique accents are added. Luckily, with a few craft supplies and some creativity, you can create your own custom...
    Make a monogrammed pacifier clip to keep the pacifier near the baby.Pacifier clips are a necessity for most babies because they always seem to lose their pacifiers. Many babies will throw the paci...
    Children will enjoy wearing whimsical spiral bows.If you have a child who enjoys making her hair look nice, you can encourage this type of personal care by providing her with beautiful hair bows....
    Headbands and barrettes are worn by many women and girls.Headbands and barrettes help keep your hair orderly and out of your eyes and face. Headbands and barrettes are typically coordinated with t...
    Make an Aisle RunnerCreating a monogram and design for an aisle runner dresses up your entire wedding ceremony. Incorporate other aspects of your wedding ceremony into the design by including a fe...